Gifting is the practice of placing orgonite at strategic locations in the environment to reduce or eliminate the harmful energies around us and restore the etheric balance to the area.

This usually results in clear air and water, improved weather (bluer skies, healthier cloud formations and reduced drought conditions) and a more natural atmosphere.

 Gifting 3: Water Gifting.

 Water has an affinity with orgone energy and gifting water often results in enhanced effects.

No special orgonite is necessary for water gifting as regular TBs work well even in the sea.

Just as gifting city streets will reduce the air pollution; gifting lakes, rivers and [...] Continue Reading…

Gifting is the practice of placing orgonite at strategic locations in the environment to reduce or eliminate the harmful energies around us and restore the etheric balance to the area.

This usually results in clear air and water, improved weather (bluer skies, healthier cloud formations and reduced drought conditions) and a more natural atmosphere.

 Gifting 2: Gridding.

 Once the Towers and other major sources of electromagnetic radiation have been taken care of; the atmosphere in the area should lighten greatly.

It may however still suffer from many small and often unseen sources of negativity produced by electronic equipment and wireless networks, electrical cables [...] Continue Reading…

Gifting is the practice of placing orgonite at strategic locations in the environment to reduce or eliminate the harmful energies around us and restore the etheric balance to the area.

This usually results in clear air and water, improved weather (bluer skies, healthier cloud formations and reduced drought conditions) and a more natural atmosphere.

 Gifting 1. Towers.

 Having made some Tower Busters (TBs) we can now use them to reduce the electromagnetic radiation in our target area.

For maximum efficiency; they should be placed as clos as is practicable to the source of the problem.

 The proliferation of ‘cell phone’ towers in recent years [...] Continue Reading…

Orgonite converts the negative energy from electronic devices into positive orgone.

These days the most hazardous electronic device in common usage is the Cell Phone.

It produces high levels of microwave radiation whenever it sends or receives a signal; making it dangerous to carry and hold against your head.

However hard the cell phone industry strives to hide the facts; many independent studies have shown a direct link between cell phone use and brain tumors, birth defects, testicular and ovarian cancer.

 Orgonite offers the only way of forestalling these problems in the form of a ‘cell phone button’ that can be easily made [...] Continue Reading…

We have looked at the three materials used in tactical orgonite and now we will learn how to combine them in a simple and practical manner.

 We will be making a Tower Buster (TB) which is a more or less ‘standard’ size (around 5cm diameter and perhaps 3cm thick).

 The name ‘Tower Buster’ derives from its primary use which is to convert the negative energy from a single telecommunications tower into positive orgone.

 First we need to select a suitable mould in which to cast the TB.

 I like to use cheap plastic moulds such as may be used to sell individual portions [...] Continue Reading…

Orgonite is made from three basic materials.

Metal shavings (a conductive material) bound in and separated by resin (a non-conductive material).

These materials are best combined in equal parts (by volume).

Natural crystalline stone interacts with these materials to produce a piezo-electric effect that greatly enhances the transmutation poterntial of the compound.

 Now we will take a look at the Crystal material that is used in Orgonite.

 Crystals grow naturally in the ground and usually form clusters similar to this one:

 The separated crystals can be cast in orgonite directly where they interact with the resin/metal matrix and greatly enhance the conversion of ambient etheric [...] Continue Reading…

Orgonite is made from three basic materials.

Metal shavings (a conductive material) bound in and separated by resin (a non-conductive material).

These materials are best combined in equal parts (by volume).

Natural crystalline stone interacts with these materials to produce a piezo-electric effect that greatly enhances the transmutation poterntial of the compound.

 In this article; we will be looking at Resin.

 Polyester Resin is used for making fiberglass amongst other things and is a practical choice for making orgonite too.

It is readily available, easy to use and hardens to form a durable, weather-proof material that can be cast in a variety of shapes and [...] Continue Reading…

Orgonite is made from three basic materials.

Metal shavings (a conductive material) bound in and separated by Resin (a non-conductive material).

These materials are best combined in equal parts (by volume).

Natural crystalline stone interacts with these materials to produce a piezo-electric effect that greatly enhances the transmutation poterntial of the compound.

 We will first be taking a look at the Metal Shavings.

 Metal of many kinds can be used in orgonite: Steel, copper, aluminium, brass etc will all have a similar effect when combined with resin and crystal in the correct proportions.

 Aluminium is often favoured because it is generally clean and weighs less [...] Continue Reading…

I read a post by Laozu on the Etheric Research forum http://8ung.at/mhotwagner/researchforum/forum/  where he shares his observations on the Dodecahedron.

 It seems that if a TB is placed at each of the 20 vertices;  a strong positive etheric field is created inside the Dodecahedron and water can be successfully charged.

 This is the first Orgonite Dodec’ that I built from 12 short collars of plastic pipe:

 I posted this photo on the Indonesian orgonite forums and was asked if I would compile a tutorial for a larger version that would charge a standard 1.5 liter bottle of mineral water.

 This is it:

 I first marked [...] Continue Reading…

When I first heard about Sylphs and saw a few photographs of them; I dismissed the idea as just more New Age delusion.

 Sylphs were said to be etheric beings that had come to help us and assure us that the World would never again be ruled by the Forces of Darkness (they looked like nothing more than wispy clouds to me).

 It was only when I noticed that they didn’t move with the wind as normal clouds do, that I began to observe them more closely.

 I saw that they would hold one position for long periods of time; sometimes changing [...] Continue Reading…